On Site Powder Coating

---

Thermoplastic powder coatings can be applied to steel and concrete without having to bake the substrate in an oven to cure the coating. Powder coating has been unachievable on permanent structures or large objects in the past due to cost prohibitive heating requirements. These polymer powders can be propelled through a flame spray machine that utilizes heat and compressed air to soften and liquefy the powder particles as they come in contact with the substrate. These coating processes can be very effective in providing a protective polymer coating on steel and concrete that may be degrading or damaged. These thermoplastic coatings are FDA approved for food grade environments and will also withstand a large spectrum of chemicals regardless of ph level. Wagner Powder Coating is able to provide long term protective coatings for any concrete and/or steel surface including chemical and food processing plant floors, rusting bridge supports, gas and oil pipelines, chemical and wastewater containments etc. Please contact us for more information about thermoplastic powder coatings and how we can provide coating solutions for your industry. 

Coating concrete effectively is difficult with most products partly due to the expansion, contraction and porous characteristics of concrete. The porous nature of concrete allows water and salts to flow through the concrete like a sponge and over time this will delaminate the coating from the concrete surface causing massive coating failures. These failures can be exacerbated by large swings in temperature and excessive freeze thaw cycles common in certain parts of the world. The proprietary coating process we utilize allows us to provide a thermoplastic coating with great expansion/contraction ratios while also achieving exceptional adhesion to the concrete surface and is UV stable. Please contact us for more information about thermoplastic powder coatings applied to concrete and how we can provide a concrete coating solution for your industry. 

Metal is utilized in all industries from one extent to another. While metal has a very large range of structural and cosmetic benefits it also corrodes quickly and loses these benefits as it is degrades from exposure to moisture and chemicals. This corrosion can be removed and the substrate can be cleaned and mechanically etched to promote proper coating adhesion. The UV stable thermoplastic coating is then flame sprayed onto the steel substrate. This process will result in a protective coating that will extend the life of the steel. Please contact us for more information about our thermoplastic powder coatings and how they can benefit your industry.